Painting your garage floor not only upgrades the look of your garage but also protects the concrete, helping it to stay in top condition for as long as possible.
Your garage floor experiences a lot of abuse, which means you can’t use just any interior or exterior oil-based paint.
The best garage floor paint is actually epoxy. It rolls on just like regular paint but cures to become a durable protective layer. These coatings come in various colors, making it possible to customize the look of your garage floor.
These concrete paints will withstand your vehicle getting parked on it, lots of foot traffic, and spills.
1. KILZ L377611 1-Part Epoxy Acrylic Concrete and Garage Floor Paint
This acrylic floor paint is one-part epoxy paint, making it an easy, no-mix formula. It’s perfect for creating a durable finish on your porch, garage, walkway, carport, or pool deck.
There are two shades of grey to choose from, light and dark. When cured and dried, it has a slip-resistant satin finish. The coating on your concrete floor will protect against stains, chemicals, and hot tire pick-up.
Once applied, it will take about two hours to dry to the touch and be ready for a second coat in four hours. This makes for a fast application.
The one-gallon size is large enough to cover 400-500 square feet on a smooth concrete surface and 300-400 on a rough or porous concrete surface. This makes one pale plenty for covering the floor of a typical two-car garage.
Keep in mind that this is a water-based epoxy floor paint, which means it won’t be as durable as other formulas on this list. You may also need to wait several days before parking on it, or you risk hot tires pulling it up.
2. Rust-Oleum 293513 Rocksolid Polycuramine Garage Floor Coating
This epoxy kit comes with a polycuramine coating, concrete etch, and metallic flakes. Each kit covers up to 500 square feet. However, there is also a smaller kit that’s perfect for a single-car garage.
Depending on the porosity of the concrete garage floor and application thickness, you may or may not be able to actually cover a full 500 square feet with a single kit.
There are four colored epoxies to choose from for your floor kit, including light grey, dark grey, mocha, and tan.
Despite this kit being trickier to apply, it does come with several benefits. You can drive on it within a day, it dries to a high gloss finish, and it’s up to 20 times stronger than other garage floor epoxy coatings.
Each kit comes with two pouches that each have two compartments. You’ll need to break the seal between the two pouches and mix the ingredients well.
You then have a limited amount of time to apply the epoxy, or it will cure in the pouch. It also takes finesse to evenly distribute the flakes, or you’ll end up with a clumpy or patchy effect.
3. KILZ Basement and Masonry Waterproofing Paint
If your concrete garage floor struggles with moisture, then you’ll need something a bit more than just a standard concrete sealer.
This basement and masonry waterproofer is a perfect solution because it can help prevent moisture from seeping up through your concrete garage floor. Once dried, it creates an alkali and mildew-resistant barrier that can withstand up to 12 PSI of water pressure.
The formula uses nanotechnology to create a waterproof barrier. One gallon can cover 75 to 125 square feet, which is significantly less than other coatings on this list. You’re also required to apply a minimum of two coatings for the paint to create an effective barrier.
Unfortunately, the manufacturer doesn’t recommend using this paint on floors, so you’ll want to be careful about how you use your garage once you’ve painted the concrete with this sealer. This probably isn’t the best option if you plan to park your cars in your garage.
4. Behr Premium Slate Gray Concrete and Garage Floor Paint
This one-part garage floor epoxy coating is an interior and exterior concrete paint. It comes in a one-gallon paint can that can cover 500 square feet or a five-gallon bucket that can cover 2,500 square feet.
You can use a brush, roller, or sprayer for the application. Once dry, it has a lovely satin finish that will enhance the look of your garage. It also has UV protection, ensuring that the grey color stays uniform and doesn’t begin to fade. The pre-mixed formula makes it easy to apply.
Plan to apply two coats to your garage floor, so you’ll need to buy more of this paint compared to others that may only need one coat. You’ll also need to wait at least four hours between coats to ensure proper curing between applications. Some people did struggle with lift off from hot tires.
5. FixAll Skid Grip Anti-Slip Paint
This 100% acrylic floor covering has a nice extra quality of having a skid grip surface that helps to prevent slip and falls. This isn’t just a promise made by the company but is supported by it also exceeds ADA standards.
It also comes in several nice colors, including camel, emerald, cobalt, crimson, smoke, slate, and jet black. You can use it on concrete, stone, asphalt, and wood.
Keep in mind that while you now have a safer surface to walk on, the rough surface can also be harder to keep clean.
It also lacks durability, which can result in it wearing off in heavy use areas. It can also be vulnerable to hot tires and getting pulled off. This paint is best suited for parking lots, walkways, swimming pools, and basketball courts.
Different Types of Garage Floor Paint
You will see the term epoxy coating, garage floor paint, or concrete stain on different products. However, not all paints are formulated the same, have the same durability, or look the same.
This chemical-based paint suspends the pigment in an acrylic polymer. It dries quickly, making it challenging to work with when painting a large garage floor. However, this is also an advantage because it means you can start using your garage again sooner. Once dry, chemical additives help it to be durable and water-resistant.
This type of paint is similar to acrylic paint because it’s water-based and formulated from an acrylic resin. However, it differs because it’s easier to buy in larger quantities. This makes it a better option for painting your garage floor. You’ll find latex paint is easier to clean up because it’s water-based. Although, this quality also means that it won’t expand and contract as well as acrylic paint.
One and Two-Part Epoxy
An epoxy coating creates a hard shell over the concrete surface that’s durable and glossy-looking. Unlike acrylic paint, epoxy is nonporous. Epoxy is the most expensive option, but it’s also the most durable and protective.
Epoxy comes in one or two-step. A one-step epoxy is ready to use right out of the can. A two-step epoxy requires you to mix the ingredients before using it. There are also several types of epoxy formulations. For example; polyurea, urethane, and polyaspartic floor coating.
How to Apply Epoxy Garage Floor Paint
Your first task is to gather all of the necessary materials for your project. Working with epoxy resin is a time-sensitive project, so you don’t want to find out too late that you are missing a much-needed piece of equipment.
1. Gather Supplies
To apply epoxy paint, you need the epoxy floor coating, brush, roller, etching solution, and decorative colored paint or metallic chips. It can also help to have gloves, masks, and rags on hand. Some epoxy garage floor paint comes in a kit, which makes it easy to get started because it will have everything you need.
To get the most professional finish, you need to prepare your garage floor before you even think about applying the epoxy. Start by sweeping and vacuuming your garage floor to remove any dust, dirt, and debris. Use a concrete patching product to fill in any cracks or chips. If needed, sand it smooth and then remove the dust.
If your garage floor isn’t new, it probably has grease or oil on it. Wash the entire floor to remove these. Then apply an etching solution that will chemically rough up the surface of the concrete. You will need to let the concrete dry for several days before you can epoxy your clean and etched garage floor.
3. Mix the Epoxy
Now that you are ready to paint your garage floor, start by mixing the epoxy. One part epoxy does not need mixing. Two-part epoxy will require you to combine the resin (paint) with the catalyst (hardener). Once you combine them, you will need to work quickly to apply the epoxy before it hardens. Typically, you have one to two hours.
4. Apply the Epoxy
Use your paintbrush to paint along the outside edge of the garage floor. Then roller the epoxy onto the center area of the garage floor. For the easiest application, start at the back wall of your garage and work your way out towards the garage door.
Be sure to leave another door to your house unlocked so you can get back into your house. Try to work in 10-foot sections to make things easier. It can also help to have someone helping you. One person can do the cutting while the other does the rolling.
If you decide to add paint chips, do so as you work. It’s easier when you have multiple sections done before you add paint chips. To get the paint chips to spread evenly, take a small amount in your hand and toss them up into the air. They will spread more evenly as they flutter down. If you plan to apply two coats, wait to add the paint chips until the second coat.
5. Leave It Alone
The last step is to leave your garage floor alone. Don’t touch it, walk on it, or drive your car on it. While most manufacturers recommend you wait at least 24 hours, it’s best to wait several days or even a week.
How To Buy Enough To Coat Your Garage Flooring
When buying an epoxy coat, it will state a range of square footage that the epoxy floor coating can cover. There’s a range because it’s hard to precisely predict how the concrete coating will perform on your specific concrete floor.
If the concrete is more porous, then more of the coating will sink into the concrete, causing it to cover a small square footage. If your application is thick, it will also use up the coating faster and ultimately cover a small area.
You don’t want to find yourself short with more garage floor to cover and no more epoxy to use. Measure the length and width of your garage floor and multiply these two numbers together to get the total square footage. Then buy enough coating to cover that square footage and then some.
A safe approach is to use the lower range number when calculating coverage. You should also consider whether or not you want to apply more than one coat. If you decide to do multiple thin coats, you will need to double the amount of square footage you need to cover your floor.
If we had to pick just one best garage floor paint to recommend, it would be the KILZ L377611 1-Part Epoxy Acrylic Concrete and Garage Floor Paint because it’s a simple one-step application process. The versatility of the paint makes it nice because you can use it in other places throughout your property for a cohesive look. It’s also from a well-established and reputable brand that you can trust.
See more about – Top 60 Best Painted Floor Ideas – Flooring Pattern Designs